Exhibitor Product Announcements

26 April 2011: Pleora Product Launch: iPORT™ Analog-Pro IP Engine

Expand your GigE Vision® compliant video network to include high-value analog cameras with Pleora’s iPORT™ Analog-Pro IP engine. Compact and simple to integrate, the iPORT Analog-Pro IP engine transmits high-quality video from analog cameras with low, predictable latency.

The iPORT Analog-Pro IP engine is compatible with GigE Vision and GenICam™ standards for video transfer and device control over a GigE link, which increases interoperability between products from different manufacturers, while dramatically lowering system cost and complexity.

Systems integrators choosing the COTS iPORT Analog-Pro IP engine as part of a vetronics modernization platform will benefit from:
• Full resolution video at up to 30 fps per channel;
• Two RS-232 ports to control external accessories;
• Software-controlled general purpose inputs and outputs;
• Compact form factor (4 inches x 2 inches x 1.7 inches);
• Low, consistent latency, appropriate for vehicle driver’s vision system; and
• Low power consumption.

SEE THE iPORT ANALOG-PRO IP ENGINE IN ACTION:
SPIE Defense, Security + Sensing 2011 exhibition
April 26-28, 2011
Cypress Hall, Booth 406
Orlando World Center Marriott Resort & Convention Center
Orlando, Florida, USA

FOR MORE INFORMATION ON THE iPORT ANALOG-PRO IP ENGINE:
www.pleora.com/products/analog-pro.php

Find out more or contact Pleora Technologies Inc.

21 April 2011: SPECIM Announces the Launch of CaliGeoPRO Software for High Speed Pre-Processing of Hyperspectral Data

21 April 2011 SPECIM, Spectral Imaging, Ltd., the renowned manufacturer of AISA Airborne Hyperspectral Systems, announces the release of CaliGeoPRO, a software for AISA sensor data pre-processing. The software features high-speed tools for radiometric processing and georeferencing of hyperspectral remote sensing data. SPECIM CaliGeoPRO also adds several important functionalities to the basic CaliGeo software, including interface for guided, easy-to-use work flow through the data processing chain, visual diagnostics tools, automated batch processing for large data sets, and real-time preview of the final image while data-processing is still in progress.

SPECIM has upgraded its CaliGeo software to CaliGeoPRO to adapt to the market needs for high capacity pre-processing of hyperspectral data. This tool has been taken to the level where AISA data from a complete flight campaign can be pre-processed in just a few hours instead of several days. CaliGeoPRO produces basic georectification at least 15 times faster than the standard CaliGeo software, and georectification using Digital Terrain Model (DTM) can be completed up-to 50 times faster than previously.

“With the new CaliGeoPRO we are serving our most demanding customer segments by providing a high-speed pre-processing tool. They can now save time and money and concentrate in the actual production” states Petri Nygrén, Product Manager of the SPECIM AISA Airborne Hyperspectral Systems. “GaliGeoPRO is an important step towards real time data processing, our ultimate goal.”

CaliGeoPRO processing can be conducted either in an interactive mode or in automated batch processing for large data sets. Real time preview can be followed while data-processing is in progress, for both a single flight line and batch processing. With a clear user interface with step-by-step instructions to go through the data processing chain, CaliGeoPRO allows to review and validate data quality with the possibility to modify the processing parameters to achieve an optimal result.

CaliGeoPRO exploits efficiently resources of multiprocessor platforms and 64bit operating systems and runs smoothly on any regular office PC having 32bit or 64bit Windows operating system with ENVI 4.7 or newer.

CaliGeoPRO will be available in June 2011.

About SPECIM
SPECIM Spectral Imaging Ltd. is the world’s leading manufacturer of hyperspectral imaging instruments and systems. In addition to airborne remote sensing systems, SPECIM provides ImSpector Imaging Spectrographs, Spectral Cameras and Hyperspectral Imaging Solutions to an increasing range of demanding industrial and science applications like colour measurement, process analytical technology (PAT), life sciences, chemical imaging and forensics.
For further information about SPECIM, please visit www.specim.com. For more information about CaliGeoPRO please contact SPECIM at info@specim.fi or tel. +358 10 4244 400.

Find out more or contact Specim Spectral Imaging Ltd.

19 April 2011: Thermobility Wireless Power Generator WPG-1

Thermobility™ is a new power generation technology that uses heat as a source of electricity for low-power wireless applications. Thermobility uses innovative solid-state thin-film thermoelectric technology to convert heat into electricity for a variety of self-contained, autonomous systems.

Thermobility™ uses differences in temperature to enable “wireless power” anywhere there is an adequate heat source and eliminates the need to use traditional wired power sources or replaceable batteries. When paired with wireless transmitters, the Thermobility solution can provide electric power for decades of maintenance-free operation, thus expanding the possibilities for new wireless sensor applications in industrial control, transportation, automotive and building management.

Advances in distributed sensors and sensor networks have led to an increased interest in the use of renewable power sources to replace or augment existing power systems. The use of heat is an attractive source of energy for many low-power sensor applications.

As the first in a series of wireless power generators, the Thermobility WPG-1 provides a constant voltage output of 3.3, 4.1 or 5.0 Vdc to electrical loads of 15kÙ or higher.

In the future, Nextreme plans to extend the Thermobility platform with additional features, including integrated energy storage for applications with variable heat sources. The design is flexible and can be customized for a variety of wireless power applications.

Find out more or contact Nextreme Thermal Solutions, Inc.

18 April 2011: The PLX Ultra Stable Hard-Mounted Hollow Retroreflector (USHM).

The Ultra Stable Hard-Mounted Hollow Retroreflector (USHM) is a self-compensating mirror that is totally insensitive to position and movement, such as tilt or rotation. Parallel incident light that hits the USHM will be returned with great accuracy to the light source, regardless of the USHM's physical orientation.

The USHM is an improved hard mount solidly connecting the Retroreflector to the next assembly. It is vacuum compatible and can be positioned about the permanently connected post in any orientation, providing greater freedom for different mounting configurations.

Stability and Accuracy.

The USHM offers properties, which enables it to perform well in critical applications, such as military, aerospace, or any OEM requirements. It is especially well suited for interferometers where high stability of the OPD and the concentricity of the apex with respect to the mounting thread are critical requirements. USHMs can also be provided in matched pairs for better modulation.

Coatings.

Standard USHM mirror coatings are aluminum, silver and gold, in both bare metal and with protective overcoats. All protected PLX coatings meet MIL-SPEC durability and adhesion requirements. Unprotected metallic coatings are especially suited to interferometric applications. Custom coatings are available.


Features: Specifications:
Glass Types Used Low-expansion Borosilicate glass
Lightweight Structure g/cm3
Specific stiffness 3.05x104Nm/g
CTE 3.25 ppm/ oC
Thermal Dependency less than or equal to 0.15% per degree
Shock Resistance Drop test, 250 G, 1.5Msec
Modulation Capability > 1kHz dependent upon the design and requirement
Vacuum Compatible Yes


PLX engineers can create a custom USHM for your application.

Potential variations include: smaller and larger apertures; special performance glass; modified mounts to meet your interface; super-critical accuracies; dielectric mirror coatings for high-powered lasers; and units able to withstand military and space environments.

PLX Inc. 25 West Jefryn Blvd. Deer Park, NY 11729
Tel: 631.586.4190 Fax: 631.586.4196 www.plxinc.com

Find out more or contact PLX, Inc.

18 April 2011: LEPTON DETECTOR ANALOG PREAMP

New low noise preamplifier electronics for the LEPTON DETECTOR series.

This electronic devices allows the analog readout of a LEPTON SERIES DETECTOR, the single element detectors from New Infrared Technologies, available in 1x1 mm2 and 2x2 mm2. This VPD PbSe detector has uncooled performance with detection in the MWIR band (3 to 5 microns range).

Along with the LEPTON ANALOG PREAMP, New Infrared Technologies will be also exhibiting all the rest of the products:

- The MATRIX 1024 SERIES, based on the first imaging FPA with uncooled performance in the MWIR, and one of the fastest imaging sensors in the world (about to reach 2,000 images per second!). Come and see our MATRIX 1024 CAMERA in action!
- The LUXELL SERIES, our line based on the linear array FPA (different sizes: 1x64, 1x128 and 1x256)

Visit our booth 3305 to explore the capabilities that uncooled MWIR, high-speed imaging has to offer your low-cost oriented applications!

New Infrared Technologies, S.L. - Booth #3305
Makes uncooled infrared imaging fast and affordable!
www.niteurope.com

Find out more or contact New Infrared Technologies

18 April 2011: HTPA series

Heimann Sensor announces the new HTPA64x62 infrared image sensor.
The new sensor array is pin-to-pin compatible to the existing HTPA32x31. The thermopile-based HTPA series provides sensor elements with very low time constants and high sensitivity, signal processing with a high frame rate comprising low noise amplifiers and serial peripheral interface. Some types have the option to provide digital image data by an integrated analogue to digital converter.
On the basis of our several years experience in design and development of thermopile sensors we improved the sensitivity of existing image sensor HTPA32x31 by a factor of 8…10 using advanced pixel design combined with vacuum packaging. Even if vacuum has been replaced by an inert gas filling the sensitivity is increased by a factor of 4…6 compared to our existing designs.
The HTPA8x8 is now available in the small TO39 package with only approx. 8mm diameter housing. This miniaturized array provides a perfect solution for low cost applications, since the diameter of the optics is a cost driving factor.
We also expanded the HTPA module portfolio. Our HTPA modules provide an easy way to get a calibrated temperature stream from the sensor. Heimann Sensor developed modules with SPI, UDP and UART interface. A CAN interface will be available, soon.

Find out more or contact Heimann Sensor GmbH

15 April 2011: VISION - The world's leading tradeshow for the machine vision industry!

The world’s leading trade fair VISION is the meeting point for the machine vision industry taking place November 8 - 10, 2011 in Stuttgart, Germany. Every year VISION is creating a platform for over 320 exhibitors and approx. 6,800 attendees and continues to grow! 82% of VISION attendees are involved in purchasing decisions. For them, VISION is number ONE as a source of machine vision information. 85% of all visitors come with concrete intentions to invest. About 25% of them invest more than 50,000 Euro. Year after year, the average share of visitors that are new to the trade fair is around 50%.

KEY EXHIBITION AREAS

Systems: Application specific, Configurable, Smart cameras, Vision sensors

Components: Illumination. Laser, Optics / Lenses / Filters, Cameras, Area & line scan cameras, High-speed / infrared cameras, Contact image sensors, Optical sensors, Frame grabbers , Software libraries, Software application packages, Processors & Computer, Measuring systems, Cables and plugs, Auxiliary materials, Accessories

Services: Training & Literature, Design and development, Prototype development, Research & development, Consulting, Association services

Applications: Barcode identification, 2D code identification, Optical character recognition, Security systems, Recognition of objects by type, Position identification, Sequence analysis, Quality inspection, Color inspection, Completeness check/assembly control, Print inspection, Texture analysis, Surface inspection of continuous material, Surface inspection of piece parts, Inline robot vision, 2D & 3D robot vision, Shape recognition, Measuring and comparing

ATTENDEE PROFILE
Automotive industry, Electro technical and electronics industries, Mechanical engineering, Precision mechanics and optical industries, Machine Vision industry, Medical device industry

SPECIAL
For first-time exhibitors only VISION is now offering a Turn-Key Package for 1,800 Euro in the International Pavilion. Or ask us about the Integration Pavilion costing 1,980 Euro.

Find out more or contact Vision Tradeshow - Messe Stuttgart

11 April 2011: Enhanced Night Vision Solutions from GSCI.

Recently unveiled Enhanced Night Vision systems DXQ-20 series, developed and manufactured by GSCI firmly positioned Company as Prime Defence Subcontractor.
Revolutionary DXQ-20 family products changed perception of low light/total darkness identification and detection solutions. Owning DXQ-20 means owning the night.
Please visit our booth #1441 to experience life demonstration of our unique, World's the only one “real time” electronic enhanced/fusion night vision systems.
For more information visit our web site: www.gsci1.com

Find out more or contact General Starlight Co., Inc.

4 April 2011: New from Iridian: IR Band-Pass Filters for Gas Detection

Iridian Spectral Technologies Ltd, a leading global supplier of optical filters, has now made available band-pass filters (BPFs) for use in gas detection applications in the infrared (IR). This new offering expands Iridian’s industry leading capabilities in design and manufacture of optical filters for spectroscopy from Raman and fluorescence applications into the growing need for gas sensing in the IR.

Iridian’s new IR gas BPF capabilities provide narrow, high transmission band-pass filters in the 2-6 um wavelength region enabling optical systems to detect the presence and concentration of gases of interest in environmental or process analysis applications.

-Discrete detection of IR spectra for common gases
-CH4, CO, CO2, NO, H2O
-FWHM ~ 5% of CWL
-Peak T > 80% (for most gas lines)
-Custom gas lines available on request

-Standard size 1” diameter
-Custom sizing available

-Reliability and durability as per MIL-C-48497A
-All dielectric hard coatings
-ROHS compliant parts

This new family of high performance IR gas filters has been developed in response to customer needs for a reliable supplier of affordable IR gas detection filters. In addition to these new standards, Iridian specializes in both custom and high volume optical filter solutions. Please contact us to discuss any optical filter needs.

About Iridian: Iridian is a diversified optical filter manufacturer that is an international leader in filter design and manufacture especially for application in the fields of fiber optic communications, optical spectroscopy, 3D entertainment, and in aerospace. It was recently ranked as one of the top 200 high technology companies in Canada and has won the annually awarded 2010 Canada Export Achievement Award for the province of Ontario sponsored by Profit magazine together with Export Development Corporation (EDC). Iridian is a global supplier with distributors in many countries particularly in Asia. The product range can be viewed at www.iridian.ca

Find out more or contact Iridian Spectral Technologies Ltd.

1 April 2011: Gratings Ruled in Gold

Custom gratings ruled directly in gold on invar, copper, ceramic or silicon.
70 - 450 grooves/mm for 4.0 - 12.0 um range
Increased efficiency allows more of generated light to be used
Ideal for high power laser applications

For product information please visit:
http://www.optometrics.com/ir_laser_optics_grg.html

Find out more or contact Optometrics Corp.

24 March 2011: Video Stabilization and Compression Platform (VSCP)

ATA’s VSCP is constructed using inertial sensors (specifically, ATA’s patented angular rate sensors), stackable camera interfaces (CameraLink, GigE Vision), and flexible FPGA-based processing. Video stabilization and H.264 video encoding represent two stages in ATA’s high-speed FPGA fabric video processing pipeline. Inertial sensors (tightly coupled to the cameras of interest) measure base camera disturbance, and provide information that is used to digitally stabilize an incoming video sequence, irrespective of inter-frame motion, environmental disturbance, and light level. Use of an FPGA provides a massively parallel architecture capable of stabilizing and compressing one 60 frame-per-second 1080P video stream, or multiple lower resolution and/or frame rate video sources concurrently. In addition, ATA’s pipelined processing approach allows for the insertion of additional video enhancement as necessary (for instance, histogram equalization) with minimal impact to the existing design.

Find out more or contact Applied Technology Associates

16 March 2011: FPGA Image Processing Toolkit (FIPT)

Our FPGA Image Processing Toolkit (FIPT) is a commercial software package that provides developers with a library of FPGA algorithms that serve as the building blocks for image processing application development. FIPT unleashes the power of FPGA processing by providing a foundational set of algorithms that the developer can then customize for their specific application – significantly reducing the costs associated with ground-level software development. FIPT is compatible with an assortment of FPGAs where it can be in-lined with the customer’s VHDL code or as a library within National Instrument’s LabVIEW FPGA graphical development environment. Applications include: medical imaging, visual inspection, image tracking, optical communications, robotic vision, laser beam control and many others. We also provide custom hardware and software design services for the vision industry. Please contact us to determine how our FPGA Image Processing Toolkit can meet your application needs.

Find out more or contact Adsys Controls Inc.

15 March 2011: FCB-EH4300

Sony, a leader in high-definition (HD) technology and the imaging industry, is combining its strengths with the introduction of its new compact FCB-EH4300 20x HD Color Block Camera. Featuring full 1920 x 1080 HD resolution, wide-dynamic range, and auto ICR functions, this amazing FCB HD camera is ideal for security and unmanned aerial vehicles.

Incorporating a 1/3” “Exmor™” CMOS sensor, the FCB-EH4300 camera boasts approximately 2 million effective pixels for exceptional HD picture quality with high sensitivity.

Find out more or contact Sony Electronics Inc.

12 March 2011: UltraFAST

Designers of the next generation of commercial wireless, fiber optic telecommunications, and military RF/microwave products know time is the enemy. Enter UltraFAST, the first and only thin film prototyping program of its kind. Rather than waiting weeks for your critical thin film prototypes, UltraSource is guaranteeing them in days—cutting your time to market, improving your competitive edge, and ensuring you enough time to hone your designs to perfection.

To meet the challenge of rapid prototyping in days, we’ve dedicated an entire team to the task of creating a streamlined manufacturing approach. With this expertise, you’ll be achieving optimal results faster than ever before and allowing yourself time to move on to other challenges. In addition, UltraFAST offers an impressive selection of single-sided and double-sided designs, options, and a broad range of metalizations.

Find out more or contact UltraSource, Inc.

9 March 2011: Ruggedized 29 Mega Pixel (6600 x 4408) CCD

Ruggedized 29 Mega Pixel (6600 x 4408) CCD, military grade camera, with >660,000 hrs MTBF. Like all Imperx “Bobcat” series cameras, the B6620 offers the most extensive advanced feature set in the industry facilitating easy integration with minimal or no customization. Available outputs: CoaXPress, GigE Vision, Camera Link.

Find out more or contact Imperx, Inc.

9 March 2011: Eagle 640x512 MWIR Camera

Nova Sensors has developed a 640x512 MWIR camera for manned and unmanned air and ground applications. Optimized for SWaP, this camera has the best queality image in the industry. The camera electronics are flexible and can accommodate any FPA at this format. Soon to come is our 1280x1024 MWIR camera built around Santa Barbara Focal Plane's SBF 207 FPA. Nova can accommodate low or high volume opportunities - we can do custom and honor the term customer service.

Find out more or contact Nova Sensors

9 March 2011: RADIOBARRIER

The RADIOBARRIER Intrusion Detection System ensures control over protected facilities and terrain areas by displaying signals of intrusion attempts to the controlled zone and the situation (status of the wireless sensors), with the sensors' coordinates linked to the terrain plan or map.
The RADIOBARRIER Intrusion Detection System includes detection devices based on different physical principles of operation (seismic, radio wave, infra-red and magnetic) and video surveillance devices allowing to detect and identify the intruder.
Radio communication between the devices of the system is based on a special two-way secure radio channel. When the devices are installed on the terrain, data exchange routes are automatically established between them. Each detection device operates as a repeater, thus enabling transmission of alarm information to a long distance (up to 100 km).

Find out more or contact POLUS-ST LTD.

8 March 2011: PAIR02 55x Zoom Lens

Pentax introduces the second generation of Pentax Atmospheric Interference Reduction (PAIR02)

PAIR02 is the next step in the award-winning* "Pentax Atmospheric Interference Reduction" technology. Focusing on the atmospheric phenomenon known as “heat haze,” or “scintillation,” PAIR02 includes the fog/smoke/dust defeating capabilities of the original PAIR, and adds cost-effective reduction of heat-induced visual interference commonly plaguing long-range surveillance in desert areas, as well as facilities such as oil refineries, freight yards, and other scenarios where temperature variations cause the phenomena.

Like PAIR01, processing is done inside the lens housing, and in near-real time. PAIR02 also adds image stabilization, eliminating image vibration and shake.

The PENTAX 55x lens offers megapixel-quality resolution, superior boresight alignment, and proprietary construction techniques to insure long life and durability.

*ISC West 2010 NPS “Best in Video” award

Find out more or contact PENTAX

7 March 2011: PDM-R

Silicon Photon Counting Detector with 60% detection efficiency at 650nm and 40% at 800nm and with less than 100ps timing resolution. These modules require only 50 volts to bias, thus they are very robust and will not be damaged due to high light levels.

Find out more or contact OptoElectronic Components

4 March 2011: Fiber Optic Distributed Temperature & Strain Sensor

OZ Optics Limited is the leading company in developing fiber optic sensors. 2009 Frost & Sullivan Award Winning sensor generates and measures stimulated brillouin scattering in optical fibers to provide high-resolution simultaneous measurements of both strain and temperature along the entire length of the fiber. By wrapping or embedding a standard telecom singlemode fiber inside a structure such as an oil pipeline, power lines or dam, users can detect when and where the structure is being strained or heated and correct the problem before failure occurs. It is ideal for monitoring large structures including oil & gas pipelines, bridges, power lines, dams, and security fences. The sensor could also be used in detecting fire and corrosion/erosion.

Find out more or contact OZ Optics Ltd.

4 March 2011: ZnS Infrared Lens Module

Far infrared (10μm) lenses made with zinc sulfide
- Low cost at mass production by mold forming process without machining
- Practical transparency at 8-12μm by optical design with aspherical and diffractive technology
- Athermalize and DLC Coating are applicable

Applications:
Far-infrared cameras, Thermal imagers, far-infrared sensors

For product information, please access to our global website.
http://global-sei.com/products/energy/zns_lens.html

Contact
Yoshi Kawabata
Email: infrared@info.sei.co.jp
Tel: +1 310 782 0227
Fax: +1 310 782 0211

Find out more or contact Sumitomo Electric U.S.A., Inc.

25 February 2011: InSight HD Video Processing Module

The InSight Video Processing Module is a state-of-the-art solution for full motion video processing of High Definition and NTSC video streams. This low-SWaP module performs advanced features including robust target tracking, image stabilization, MPEG-4 encoding, multi-sensor image fusion, video conversion and digital zoom. The module’s robust I/O supports full HD video, NTSC composite video as well as RS-232 and Gigabit Ethernet communications. Expansion ports allow for HD-SDI, Camera Link, and GigE Vision video sources. InSight’s software features digitally stabilized video, multiple tracking algorithms capable of tracking morphing targets in cluttered scenes and through temporary obscurations, a HD Picture-In-Picture window of target of interest, HD-to-SD conversion, and simultaneous multi-camera support (EO/IR). InSight provides high horsepower vision solutions for an array of ISR, remote sensing, ground-based, security, robotic, and scientific applications.

Find out more or contact Adsys Controls Inc.

22 February 2011: RoLin

RoLin is a component level encoder consisting of an RLM readhead and MS magnetic scale or MR ring. It has been designed for embedded motion control applications as a position control loop feedback element. The actuator is a periodically magnetised scale or ring with a pole length (P) of 2 mm. Radial or axial reading of the ring is possible.
State of the art position sensing assures highly repeatable position measurement under wide installation tolerances and temperature range. The electronics inside the readhead
enable high interpolation rates up to 13 bits and fault monitoring. The incremental outputs are re-timed to the
chosen minimal edge separation time (from 0.12 μ,s).

Find out more or contact Renishaw Inc.

18 February 2011: FC300 High Force Device Bonder

The FC300 is the newest generation of high accuracy and high force system for chip-to-chip and chip-to-wafer bonding, on wafers up to 300 mm. The tool features automated handling of chips and substrates up to 100 mm from waffle packs, plus a robotic option enabling chip picking from diced wafer and automated handling of larger substrate. With a quick process head reconfiguration, the FC300 platform performs multiple applications. Its Universal Bonding Arm enables to apply a bonding force up to 4,000N, which is particularly interesting for Cu-Cu bonding (3D integration) as well as packaging of IR-FPA sensors.
SET is the leader for bonding equipment enabling hybridization of infrared Focal Plane Arrays. Based on its experience, SET developed a patented substrate chuck and a bond head with a localized confinement chamber which operates safely with reducing gases such as forming gas or formic acid vapor. This configuration enables to prevent or reduce oxide formation on bonding surfaces.

Find out more or contact SET - Smart Equipment Technology S.A.S.

18 February 2011: DynaFiz Laser Fizeau Interferometer

ZYGO's DynaFiz™ is a new instantaneous Fizeau-type interferometer optimized for dynamic metrology in the presence of extreme vibrations and air turbulence. The light efficient optical design combined with a high power stabilized HeNe laser offers fast shutter rates to freeze disturbances and its high resolution camera provides enhanced surface characterization. ZYGO’s new MetroPro™X software with LivePhase™ enables real-time Zernike analysis for active alignment and dynamic testing of optical systems. The DynaFiz interferometer is also available with a phase modulator for added versatility and high performance on-axis metrology.

Find out more or contact Zygo Corporation

18 February 2011: KPG Laser Goggle

Kentek presents the “KPG” Premium Goggle for the ultimate laser safety in an ergonomic design. This goggle fits comfortably when worn alone or over vision-correcting glasses. The polycarbonate 11-base wrap lens is optically correct and offers an extremely wide, unobstructed viewing area with superb peripheral vision. The soft elastomer seal with indirect vents provides excellent airflow to enable wearing the goggle for extended periods of time. KPG features a 2-way adjustable strap with tilt and pivot actions to accommodate both large and small heads. Meets ANSI Z136.1 and Z87+. Several CE options are available. Storage case included.

Find out more or contact Kentek Corp.

18 February 2011: Deformable mirror with integrated tip-tilt

15-mm micromachined membrane deformable mirror with 17 actuators and integrated tip-tilt stage has been specially designed for correction of low-order aberrrations.
The deformable mirror has the actuator geometry optimized for the correction of the low-order aberrations, with 12 actuators located outside of the working aperture of 10 mm, and is mounted on a piezoelectric tip-tilt stage. This allows to avoid the double use of the pupil-conjugated plane and to build more compact adaptive optical systems.

The mirror has tip and tilt range of 24 µm at 10 mm aperture and 8.8 µm defocus range in the reflected wavefront.
For more detailed technical data, please go to http://www.okotech.com/mmdm17tt .

Find out more or contact Flexible Optical BV

31 January 2011: LensCheck™

The LensCheck™ is an innovative system for both production and prototype lens qualification. The system features high -resolution motorized stages, 12-bit real-time video, and integrated glass scale encoders providing accurate, efficient measurements in a compact, portable system.

The LensCheck™is coupled with Optikos’ patented VideoMTF™ image analysis software allowing for real-time MTF measurements. This enables manufacturers to qualify incoming products quickly and reliably while greatly minimizing the risks of sub-standard complete assemblies. The new LensCheck™ also offers a large variety of options such as objectives, filters, lens mounts and transmission kits enabling users to customize the system for their unique lens measurement needs.

Find out more or contact Optikos Corp.

21 January 2011: Online Media and Optics.org

Online media is now the main marketing tool used to deliver cost effective lead generation, brand awareness and traffic growth.

Optics.org offers a multitude of marketing solutions to suit every need and budget and, because the site is divided into four key industry sectors, you are also able to align your message directly to the individuals you want to reach.

Find out more or contact optics.org

13 January 2011: THE PHOTON COUNTER

The new COUNT photon counting modules achieve an unrivaled quantum efficiency of over 70% in the red region. The modules are perfectly suited for measurements across the entire wavelength range from 400-1000nm. The new COUNT series is based on a purpose-developed silicon Geiger-mode APD which is one of the lowest-noise APDs on the market. Together with electronics that have been optimized down to the smallest detail. Standard modules are available with dark count rates ranging from 20-250 counts. Modules with 10cps (counts per second) are available too. Due to plug&play compatibilityk, replacing existing photon counters with the COUNT module is child's play.

Find out more or contact Laser Components IG, Inc.

12 January 2011: Beryllium/Aluminum Matrix Alloy

Brush Wellman, Inc. and Nu-Cast, Inc. are in the development phase on an investment cast product with a Beryllium/Aluminum matrix material. This material offers superior mechanical stiffness and coefficient of thermal expansion in a lightweight monolithic near net shape High Performance casting.

Find out more or contact Nu-Cast, Inc.

11 January 2011: Series 8000 Miniature Video Tracker

To complement its extensive family of standard tracker products, Electro-Optical Imaging, Inc. is proud to announce the latest product offering, the Series 8000 family of miniature video tracker products.

The Series 8000 Automatic Video Tracker is a miniaturized version (10 square inches nominal) of the 7000 Series of VME and PCI products and is intended for surveillance, airborne and limited space applications.

The design provides the full range of operational performance found in all the 7000 Series tracker products. The Series 8000 tracker has the additional advantage of supporting full customization to the user’s signal and mechanical interfaces. This product expands the utility of the E-O Imaging Series 7000 tracker technology to systems and applications where reduced size, power and weight are key parameters.

For more information visit www.EOImaging.com.

Find out more or contact Electro-Optical Imaging, Inc.

31 December 2010: VA-29MC

Vieworks, a leading supplier of high performance digital cameras for Military, Industrial, and Scientific market applications, just introduced the world’s highest resolution interline transfer CCD camera having 29 million pixel resolution - 6,576(H) x 4,384(V), electronic shutter, 5 FPS readout, 12-bit digital output, low noise resulting in high dynamic range, and full 35mm optical format.

The cameras high resolution, exceptional sensitivity to light, and small compact rugged design makes it ideal for Persistent Surveillance, ISR, UAV, and other surveillance applications. The camera is available in both monochrome or color versions and with gigabit ethernet (GigE VisionTM) or Camera LinkTM digital output for easy connection to a computer system.

Find out more or contact Vision Systems Technology, LLC

29 December 2010: RIEGL VQ-580

Riegl USA is proud to announce a new addition to the V-line Airborne Laser fleet of instruments that Riegl Laser Measurement Systems GmbH has released the VQ-580. The VQ-580 provides high speed, non-contact data acquisition using a narrow near-infrared laser beam and a fast line scanning mechanism and was especially designed to measure on snow and ice. High-accuracy laser ranging is based on Riegl’s unique echo digitization and online waveform processing, which allows achieving superior measurement results even under adverse atmospheric conditions, and the evaluation of multiple target echoes. The main applications for the VQ-580 are glacier and snowfield mapping, along with, agriculture and forestry mapping, topography and mining, lakeside and riverbank mapping, corridor mapping, city modeling and mapping of power lines.
The scanning mechanism is based on a fast rotating multi-facet polygonal mirror, which provides fully linear, unidirectional and parallel scan lines.

Find out more or contact Riegl USA, Inc.

29 December 2010: RIEGL VQ-580

Riegl USA is proud to announce a new addition to the V-line Airborne Laser fleet of instruments that Riegl Laser Measurement Systems GmbH has released the VQ-580. The VQ-580 provides high speed, non-contact data acquisition using a narrow near-infrared laser beam and a fast line scanning mechanism and was especially designed to measure on snow and ice. High-accuracy laser ranging is based on Riegl’s unique echo digitization and online waveform processing, which allows achieving superior measurement results even under adverse atmospheric conditions, and the evaluation of multiple target echoes. The main applications for the VQ-580 are glacier and snowfield mapping, along with, agriculture and forestry mapping, topography and mining, lakeside and riverbank mapping, corridor mapping, city modeling and mapping of power lines.
The scanning mechanism is based on a fast rotating multi-facet polygonal mirror, which provides fully linear, unidirectional and parallel scan lines.

Find out more or contact Riegl USA, Inc.

22 December 2010: LaserScan

Block Engineering, a leading developer of mid-infrared spectroscopy sensors announces the release of a handheld version of its Laserscan. LaserScan, our widely tunable mid-IR Quantum Cascade Laser spectrometer, detects and measures substances on surfaces from a standoff distance of 6 inches to 2 feet. LaserScan identifies bulk materials and detects sub-micron films based on their mid-IR absorption characteristics. Key applications include detection of explosive materials, traditional and nontraditional chemical agents, and toxic industrial chemicals. It can also analyze gases and liquids.

Find out more or contact Block MEMS/Engineering

12 November 2010: HAWK MWIR LENS ASSEMBLY

A unique MWIR 15 – 330 mm F/4 continuous zoom lens assembly with DSP controller for short distance cold shield detectors. The assembly is compatible with 9.6 mm x 7.68 mm cooled detectors with 14.5 mm cold shield. The DSP motorized controller allows for fast zoom while maintaining focus over the entire zoom range. Focus Range is from 10m to infinity. Operating temperature -30 C to +70 C
Features include compact and light weight package for Homeland Security application including payload. The rugged and robust design includes an optional DLC coating which conforms to MIL-STD-810E for Shock and Vibration allows for use in harsh environmental conditions.

Find out more or contact ISP Optics Corp.

7 October 2010: Nitrogen Enhanced Purge Systems

The NEPS (Nitrogen Enhanced Purge System) provides easy-to-use purging with automatic operation and efficient use of nitrogen. It creates a dry environment within equipment or a system by measuring the dryness of the purge gas as it leaves the system being dried, thus minimizing the amount of nitrogen needed per purge. NEPS nitrogen purge systems are suitable for use with night vision goggles, cameras, imaging systems and other sealed electro-optical equipment. The NEPS can also be used to leak test equipment and to test the quality of the source gas.

Standard models use customer-supplied dry gas source. Field service models are also available, which provide a self-contained desiccant compartment and internal pump to create dry air.

Find out more or contact AGM Container Controls, Inc.

10 June 2010: HESP-E-7-60 compact eye-safe laser

Kigre manufactures High Efficiency Side Pump, (HESP) Diode Pumped Solid State (DPSS) Lasers and components. Compact eye-safe high power diode pumped 1.5µm lasers are suitable for laser range-finding, range-gated imaging and LIBS. The MK-11 & 81 (1Hz), MK-85 & 88 (10Hz) MK-830 (30Hz) and HESP-E-7-60 (60Hz) are 1535nm Q-switched laser products based upon conduction cooled High Efficiency Side Pump, (HESP) Diode Pumped Solid State Lasers (DPSS) technology.

Find out more or contact Kigre, Inc.